Dell W-Series 304 Instant 6.5.1.0-4.3.1.0 CLI Reference Guide - Page 2040

show whitelist-db cpsec-seq show whitelist-db cpsec-seq Description Display the current sequence number for the master or local controller whitelists. Syntax No Parameters Usage Guidelines The current sequence number in the Sequence Number Details table shows the number of changes to the campus AP whitelist made on this controller. Each controller compares its campus AP whitelist against whitelists on other controllers every two minutes. If a controller detects a difference, it will send its changes to the other controllers on the network. If all other controllers on the network have successfully received and acknowledged all whitelist changes made on this controller, every entry in the sequence number column in the controller whitelist will have the same value as the number displayed in the Sequence Number Details table. If a controller in the master or local controller whitelist has a lower sequence number, that controller may still be waiting to complete its update, or its update acknowledgement may not have yet been received. Example The output of the first command below shows that the campus AP whitelist has been updated 3 times on the master controller. The second command shows the local controller list on the master controller, and verifies that both local controllers have received and acknowledged all three of these changes. (host) #show whitelist-db cpsec-seq Sequence Number Details Table Name Current Seq Number ---------- cpsec_whitelist 3 Whitelist Entries: 97 (host) # show whitelist-db cpsec-local-list Registered Local Controller Details MAC-Address IP-Address Sequence Number ----------- 00:0b:86:51:a5:4c 10.3.53.2 3 0 00:A0:C9:14:C8:29 10.3.53.4 3 0 Remote Sequence Number 1 0 NULL Update Count Whitelist Entries: 2 Dell Networking W-Series ArubaOS 6.5.x | Reference Guide show whitelist-db cpsec-seq | 2040