Dell W-Series 304 Instant 6.5.1.0-4.3.1.0 CLI Reference Guide - Page 87

aaa ipv6 user add aaa ipv6 user add authentication-method {dot1x|stateful-dot1x} mac name profile role Description This command manually assigns a user role or other values to a specified IPv6 client. Syntax Parameter authentication-method dot1x stateful-dot1x mac name profile role Description IPv6 address of the user to be added. Authentication method for the client. 802.1X authentication. Stateful 802.1X authentication. MAC address of the client. Name of the client. AAA profile for the client. User role for the client. Usage Guidelines This command should only be used for troubleshooting issues with a specific IPv6 client. This command allows you to manually assign a client to a role. For example, you can create a role "debugging" that includes a policy to mirror session packets to a specified destination for further examination, then use this command to assign the "debugging" role to a specific client. Use the aaa ipv6 user delete command to remove the client or device from the role. Note that issuing this command does not affect ongoing sessions that the client may already have. For example, if a client is in the "employee" role when you assign them to the "debugging" role, the client continues any sessions allowed with the "employee" role. Use the aaa ipv6 user clear-sessions command to clear ongoing sessions. Example The following commands create a role that logs HTTPS traffic, then assign the role to a specific IPv6 client: ip access-list session ipv6-log-https any any svc-https permit log user-role ipv6-web-debug Dell Networking W-Series ArubaOS 6.5.x | Reference Guide aaa ipv6 user add | 87