Dell W-Series 304 Instant 6.5.1.0-4.3.1.0 CLI Reference Guide - Page 1225

Column Num Switches Collect Stats Bssid Type Status Last-reg N-reg Last-update Next-update N-updates Last-ack Type Server IP Port Frequency Active Rpt-Tags Tag-Mcast-Addr Tags-Sent Rpt-Sta Description Number of controllers to which this AP has access. If the value is 1, the AP has access to a master or a local controller. If the value is 2, the AP has access to a master and a local controller. If enabled, the AP will collect statistics to send the WMS process on its controller. BSSID of the radio. Indicates whether the controller type is master or local. If up, the AP can reach the controller. If down, the AP cannot reach the controller. The time the AP last registered with the WMS process. Number of times the AP has registered with the WMS process. The last timer tick time the AP updated the WMS process. Interval between the last update and the next scheduled update. Number of updates sent to the WMS process. Number of timer ticks since the AP received an acknowledgement from the WMS process. Type of RTLS server used by the AP, such as MMS or Aeroscout. IP address of the RTLS server. Port used by the RTLS server. Rate, in seconds, at which RTLS messages are sent to the server. Indicates if the server is active on the AP. Displays whether tag reporting is enabled or not. Displays MAC OUI of the tags that are forwarded to the server. Displays the cumulative count of the tag reports sent to server. Displays whether station reporting is enabled or not. 1225| show ap monitor debug Dell Networking W-Series ArubaOS 6.5.x | Reference Guide