Dell W-Series 304 Instant 6.5.1.0-4.3.1.0 CLI Reference Guide - Page 719

Parameter cm-lb-client-thresh cm-lb-signal -delta cm-lb-snr-thresh cm-lb-thresh Description Range If an AP radio has fewer clients than the client match load balancing threshold defined by this parameter, the AP will not participate in load balancing. 0-100 clients Client match will not move a client to a new radio if the signal strength of the target AP is this dB value lower than the radio to which the client is currently associated. This parameter works differently than the cm-lb-snr-thresh value, which imposes a definite value on the target AP's signal-to-noise radio. the cm-lb-signal-delta parameter imposes a relative constraint based upon the signal strength of the radio to which the client is currently associated. 0-20 dB Clients must detect a SNR from an underutilized AP radio at or above this threshold before the client match feature considers load balancing a client to that radio. 0-100 dB When the client match feature is enabled, clients may be steered from a highly utilized channel on an AP to a channel with fewer clients. If a channel on an AP radio has this percentage fewer clients than another channel supported by the client, the client match feature may move clients from the busier channel to the channel with fewer clients. 0-100 % Default 30 5 dB 25 20 719| rf arm-profile Dell Networking W-Series ArubaOS 6.5.x | Reference Guide