Dell W-Series 304 Instant 6.5.1.0-4.3.1.0 CLI Reference Guide - Page 402

Parameter ssid Description Enter the keyword ssid followed by the SSID string to be matched or excluded Range - Default - Usage Guidelines AP classification rule configuration is performed only on a master controller. If AMP is enabled via the mobilitymanager command, then processing of the AP classification rules is disabled on the master controller. A rule is identified by its ASCII character string name (32 characters maximum). The AP classification rules have one of the following specifications: l SSID of the AP l SNR of the AP l Discovered-AP-Count or the number of APs that can see the AP Once you have created an AP classification rule, but must ienable it by adding it to the IDS AP Matching Rules profile: ids ap-rule-matching rule-name SSID specification Each rule can have up to 6 SSID parameters. If one or more SSIDs are specified in a rule, an option of whether to match any of the SSIDs, or to not match all of the SSIDs can be specified. The default is to check for a match operation. SNR specification Each rule can have only one specification of the SNR. A minimum and/or maximum can be specified in each rule and the specification is in SNR (db). Discovered-AP-Count specification Each rule can have only one specification of the Discovered-AP-Count. Each rule can specify a minimum or maximum of the Discovered-AP-count. The minimum or maximum operation must be specified if the Discovered-AP-count is specified. The default setting is to check for the minimum discovered-AP-count. Example The following example configures the AP Configuration Rule Profile named "rule1", then enables the rule by adding it to the IDS AP Matching Rules profile. (host) (config) #ids ap-classification-rule rule1 (host) (IDS AP Classification Rule Profile "rule1") #check-min-discovered-aps (host) (IDS AP Classification Rule Profile "rule1") #classify-to-type neighbor (host) (IDS AP Classification Rule Profile "rule1") ! (host) (config) #ap-rule-matching rule-name rule1 Command History Release ArubaOS 6.0 Modification Command introduced 402| ids ap-classification-rule change Dell Networking W-Series ArubaOS 6.5.x | Reference Guide