Dell W-Series 304 Instant 6.5.1.0-4.3.1.0 CLI Reference Guide - Page 1037

Parameter Authentication Failure Blacklist Time Fast Roaming Strict Compliance VLAN Mobility Remote-AP Operation Dell Networking W-Series ArubaOS 6.5.x | Reference Guide Description Shows the time, in seconds, a client is blocked if it fails repeated authentication. If the virtual AP shows a value of 0, a blacklisted client is blocked indefinitely. Shows if the AP has enabled or disabled fast roaming. If enabled, the virtual AP denies client association requests if the AP and client station have no common rates defined. Some legacy client stations which are not fully 802.11-compliant may not include their configured rates in their association requests. Such noncompliant stations may have difficulty associating with APs unless strict compliance is disabled. Shows if a virtual AP has enabled or disabled VLAN (Layer-2) mobility Shows when the virtual AP operates on a remote AP: l always-Permanently enables the virtual AP (Bridge Mode only). This option can be used for non-802.1X bridge VAPs. l backup-Enables the virtual AP if the remote AP cannot connect to the controller (Bridge Mode only). This option can be used for non802.1X bridge VAPs. l persistent- Permanently enables the virtual AP after the remote AP initially connects to the controller (Bridge Mode only). This option can be used for any show ap config | 1037