Dell W-Series 304 Instant 6.5.1.0-4.3.1.0 CLI Reference Guide - Page 2045

00:0b:86:66:02:09 default LAB-AP AP_Authenticated Authenticated Provisioned Authenticated Authenticated Provisioned Description ----------- Date-Added ---------Thu Mar 5 21:25:36 2009 Thu Mar 5 21:25:49 2009 Wed Mar 4 20:16:16 2009 Tue May 19 07:53:29 2009 Fri May 8 10:37:40 2009 Enabled ------Yes No Yes Yes Yes Remote-IP ------192.0.2.3 192.0.2.78 192.0.2.6 192.0.2.12 192.0.2.13 AP Entries: 5 The output of this command includes the following information: Parameter Name AP-Group AP-name Full-name AuthenUsername Revoke-Text AP_ Authenticated Description MAC address of the remote AP. Name of the AP group to which th remotee AP has been assigned. Name of the remote AP. If no name has been specified, this column will display the remote AP's MAC address Text string used to identify the remote AP. This field often describes the AP's user, and corresponds to the User Name field in the RAP whitelist in the WebUI. User name of the user who authenticated the remote AP. This parameter holds the user name of the user who authenticated the remote AP. This is related to the zero touch authentication feature, as a user needs authenticate an AP before it gets its complete configuration. Before the AP is authenticated, it is given a restricted configuration to allow users to perform captive portal authorization via the remote AP's ENET ports to authenticate the remote AP. The username used during captive portal authentication will be stored in this field. This cannot be added manually when creating a local-userdb-ap entry. The command whitelist-db rap revoke includes an optional revoke-comment parameter that allows network administrators to explain why the remote AP was revoked. If a remote AP is revoked, and a revoke comment entered, this text appears in the revoke-text column in the show whitelist-db rapcommand. When a local DB entry is reenabled via the command whitelist-db rap modify mac-addr mode enable, this field is cleared. This column indicates the authorization status of the RAP. A RAP can either be Authenticated or Provisioned. Remote APs that do not support certificated-based provisioning will always display a Provisioned status. Remote APs that support certificated-based provisioning can display either a Authenticated or Provisioned status, depending on their configuration and authentication status. l If the remote AP has a defined AP authorization profile, the remote AP will be in a "Provisioned" state with a limited configuration until it is authenticated. After it the remote AP has been authenticated, it will be in an "Authenticated" state. l If the remote AP does not have a defined AP authorization profile, the remote AP will be in a"Provisioned" state, but will still receive the full configuration assigned to that AP and its AP group. 2045| show whitelist-db rap Dell Networking W-Series ArubaOS 6.5.x | Reference Guide