Dell W-Series 304 Instant 6.5.1.0-4.3.1.0 CLI Reference Guide - Page 1317

show ap spectrum local-override show ap spectrum local-override Description This command shows a list of AP radios currently converted to spectrum monitors via the spectrum localoverride list Syntax No parameters Examples The output of this example shows that three APs each have two radios defined as spectrum monitors. (host) #show ap spectrum local-override Spectrum Local Override Profile Parameter Value --------- ----- Override Entry AP ap125 band 2ghz Override Entry AP ap125 band 5ghz Override Entry AP ap105 band 2ghz Override Entry AP ap105 band 5ghz Override Entry AP apcorp1 band 2ghz Override Entry AP APcorp1 band 5ghz The Value column in the output of this command includes the following information: Parameter Override Entry Description Indicates that an AP radio has been added to the local override list Value Radio that has been added to the override list, and the band used by that radio. Related Commands Command ap spectrum local-override Description Mode Convert an AP or AM into a spectrum monitor by adding it to the spectrum local-override list. Config mode on master or local controllers rf dot11a-radio-profilemode spectrum-mode Set a 802.11a radio so the device operates as an spectrum monitor, and can send spectrum analysis data to a desktop or laptop client. Config mode on master or local controllers Dell Networking W-Series ArubaOS 6.5.x | Reference Guide show ap spectrum local-override | 1317