Dell W-Series 304 Instant 6.5.1.0-4.3.1.0 CLI Reference Guide - Page 766

rf spectrum-profile rf spectrum-profile age-out audio|bluetooth|cordless-ff-phone|cordless-fh-base|cordless-fh-network|genericff|generic-fh|microwave|microwave-inverter|unknown|video|wifi|xbox clone no ... Description Define the device ageout times used by a spectrum monitor, or hybrid AP radio. Syntax Parameter age-out Description Use the age-ou t parameter to define the number of seconds for which a specific device type must stop sending a signal before the spectrum monitor considers that device no longer active on the network. Range audio bluetooth Some audio devices such as wireless speakers and microphones also use fixed frequency to continuously transmit audio. These devices are classified as Fixed Frequency (Audio). 5-65535 seconds Bluetooth devices. Note that this setting is applicable to 2.4GHz spectrum monitor radios only. 5-65535 seconds cordless-ff-phone Some cordless phones use a fixed frequency to transmit data (much like the fixed frequency video devices). These devices are classified as Fixed Frequency (Cordless Phones). 5-65535 seconds cordless-fh-base Frequency hopping cordless phone base units transmit periodic beacon-like frames at all times. When the handsets are not transmitting (i.e., no active phone calls), the cordless base is classified as Frequency Hopper (Cordless Base). 5-65535 seconds cordless-fh-network When there is an active phone call and one or more handsets are part of the phone conversation, the device is classified as Frequency Hopper (Cordless Network). Cordless phones may operate in 2.4 GHz or 5 GHz bands. Some phones use both 2.4 GHz and 5 GHz bands (for example, 5 GHz for Base-to-handset and 2.4 GHz for Handset-tobase). These phones may be classified as unique Frequency Hopper devices on both bands.. 5-65535 seconds Default 10 sec 25 sec 10 sec 240 sec 60 sec Dell Networking W-Series ArubaOS 6.5.x | Reference Guide rf spectrum-profile | 766