Dell W-Series 304 Instant 6.5.1.0-4.3.1.0 CLI Reference Guide - Page 791

Parameter Maximum number of times Held State can be bypassed Dynamic WEP Key Message Retry Count Dynamic WEP Key Size Interval between WPA/WPA2 Key Messages Delay between EAP-Success and WPA2 Unicast Key Exchange Delay between WPA/WPA2 Unicast Key and Group Key Exchange Time interval after which the PMKSA will be deleted Delete Keycache upon user deletion Enabled WPA/WPA2 Key Message Retry Count Value Number of consecutive authentication failures which, when reached, causes the controller to not respond to authentication requests from a client while the controller is in a held state after the authentication failure. Number of times unicast/multicast EAPOL key messages are sent to the client. Dynamic WEP key size, either 40 or 128 bits. Interval, in milliseconds, between each WPA key exchange. The allowed range of values is 10005000 msecs, and the default value is 1000 msecs. Show the delay interval between EAP-Success and unicast key exchanges, in msec. Range: 0-2000msec. Default: 0 (no delay). Interval, in milliseconds, between unicast and multicast key exchanges. Show the PMKSA cache interval. Time interval in Hours. Range: 1-2000. Default: 8 hrs. If enabled, the controller deletes the key cache entry when the user entry is deleted. Number of times WPA/WPA2 key messages are retried. 791| show aaa authentication dot1x Dell Networking W-Series ArubaOS 6.5.x | Reference Guide