Dell W-Series 304 Instant 6.5.1.0-4.3.1.0 CLI Reference Guide - Page 82

Rule Type Condition Value l xSec essid: Assign client to a role or VLAN based upon the ESSID to which the client is associated One of the following: l contains l ends with l equals l does not equal l starts with l value of (does not take string; attribute value is used as role) string location: Assign client to a role or VLAN based upon the ESSID to which the client is associated One of the following: l equals l does not equal string macaddr: MAC address of the client One of the following: l contains l ends with l equals l does not equal l starts with MAC address (xx:xx:xx:xx:xx:xx) The device identification feature allows you to assign a user role or VLAN to a specific device type by identifying a DHCP option and signature for that device. If you create a user rule with the DHCP-Option rule type, the first two characters in the Value field must represent the hexadecimal value of the DHCP option that this rule should match, while the rest of the characters in the Value field indicate the DHCP signature the rule should match. To create a rule that matches DHCP option 12 (host name), the first two characters of the in the Value field must be the hexadecimal value of 12, which is 0C. To create a rule that matches DHCP option 55, the first two characters in the Value field must be the hexadecimal value of 55, which is 37. The following table describes some of the DHCP options that are useful for assigning a user role or VLAN. DHCP Option 12 Description Host name Hexidecimal Equivalent 0C 55 Parameter Request List 37 60 Vendor Class Identifier 3C 81 Client FQDN 51 Dell Networking W-Series ArubaOS 6.5.x | Reference Guide aaa derivation-rules | 82