Dell W-Series 304 Instant 6.5.1.0-4.3.1.0 CLI Reference Guide - Page 165

ap image-preload ap image-preload activate all-aps|specific-aps add {ap-group | ap-name } cancel clear-all delete {ap-group | ap-name } [partition ] [max-downloads ] Description Configure APs to preload a new software image from a controllerbefore the controller starts actively running the new image. Syntax Parameter activate all-aps specific-aps add ap-group ap-name cancel clear-all delete ap-group Description Issue the ap image-preload activate command to activate this feature, allowing APs in the preload list to start downloading their new image from the controller. All APs will be allowed to pre download the image. Only APs in the preload list will be allowed to preload the image. Add individual APs or AP groups to the list of APs allowed to preload the image. Add a group of APs to the preload list. Add an individual AP to the preload list. Cancel the AP preload and clear the preload list. Any APs downloading a new image at the time this command is issued will continue to download the file. Clear all APs from the preload list. Delete an individual AP or AP group from the preload list. NOTE: This command may be issued before or after preloading is activated. If it is executed after preloading has already been activated, any APs downloading a new image at the time this command is issued will continue to download the file. APs that are still waiting to preload will be removed from the preload list. Remove the specified group of APs from the preload list Dell Networking W-Series ArubaOS 6.5.x | Reference Guide ap image-preload | 165