Dell W-Series 304 Instant 6.5.1.0-4.3.1.0 CLI Reference Guide - Page 2119

Parameter Dynamic Multicast Optimization (DMO) Dynamic Multicast Optimization (DMO) Threshold Drop Broadcast and Multicast Description If enabled DMO techniques will be used to reliably transmit video data. Maximum number of high-throughput stations in a multicast group beyond which dynamic multicast optimization stops. If enabled, the virtual AP will filter out broadcast and multicast traffic in the air. Convert Broadcast ARP requests to unicast Authentication Failure Blacklist Time Blacklist Time Deny Inter User Traffic Deny time range DoS Prevention HA Discovery on-association If enabled, all broadcast ARP requests are converted to unicast and sent directly to the client. Time, in seconds, a client is blocked if it fails repeated authentication. An authentication failure blacklist time of 0 blocks failed users indefinitely. Number of seconds that a client is quarantined from the network after being blacklisted. This option, when enabled, denies traffic between the clients using this virtual AP profile. The firewall comand includes an option to deny all inter-user traffic, regardless of the Virtual AP profile used by those clients. If the global setting to deny inter-user traffic is enabled, all inter-user traffic between clients will be denied, regardless of the settings configured in the virtual AP profiles. If the setting to deny interuser traffic is disabled globally but enabled on an individual virtual ap, only the traffic between untrusted users and the clients on that particular virtual AP will be blocked. Time range for which the AP will deny access. If enabled, APs ignore deauthentication frames from clients. This prevents a successful deauth attack from being carried out against the AP. This does not affect third-party APs. If enabled, home agent discovery is triggered on client association instead of home agent discovery based on traffic from client. Mobility on association can speed up roaming and improve connectivity for clients that do not send many uplink packets to trigger mobility (VoIP clients). Best practices is to leave this parameter disabled as it increases IP mobility control traffic between controllers in the same mobility domain. Enable this parameter only when voice issues are observed in VoIP clients. 2119| show wlan virtual-ap Dell Networking W-Series ArubaOS 6.5.x | Reference Guide