Dell W-Series 304 Instant 6.5.1.0-4.3.1.0 CLI Reference Guide - Page 2250

whitelist-db cpsec delete whitelist-db cpsec delete mac-address Description Remove an individual AP entry to the campus AP whitelist. Syntax Parameter mac-address Description MAC address of the AP you want to remove from the campus AP whitelist. Usage Guidelines Use this command to remove an individual whitelist entries for an AP that has been either removed from the network, or is no longer a candidate for automatic certificate provisioning. If the AP whose entry you deleted is still connected to the network and the control plane security feature is configured to send certificates to all APs (or a range of addresses that include that AP), then the controller will send the AP another certificate, and the AP will reappear in the campus whitelist. To permanently revoke a certificate from an invalid or suspected rogue AP, use the command whitelist-db cpsec revoke. Example The following command removes an AP with the MAC address 10:14:CA:AF:3E:E1 from the campus AP whitelist.: (host) (config) #whitelist-db cpsec delete mac-address 10:14:CA:AF:3E:E1 Related Commands Command show whitelist-db cpsec Description Show the campus AP whitelist for the control plane feature. Mode Enable mode Command History This command was introduced in ArubaOS 5.0. Command Information Platforms All platforms Licensing Base operating system. Command Mode Config mode on master or local controllers Dell Networking W-Series ArubaOS 6.5.x | Reference Guide whitelist-db cpsec delete | 2250