Dell W-Series 304 Instant 6.5.1.0-4.3.1.0 CLI Reference Guide - Page 1189

show ap mesh debug counters show ap mesh debug counters {ap-name }|{bssid }|{ip-addr } Description Show counters statistics for a mesh node. Syntax Parameter ap-name bssid ip-addr Description Show counter statistics for an AP with a specific name. Show counter statistics for a specific Basic Service Set Identifier (BSSID) on an AP. An AP's BSSID is usually the AP's MAC address. View counter statistics for an AP with a specific IP address. Enter the IP address of the AP in dotted-decimal format. Example The example below shows the Mesh Packet Counters table for an AP named meshpoint1. The Probe Resp, Assoc Req, and Assoc Resp data columns show both the total number of counters and, in parenthesis, the number of requests or responses with high-throughput information elements (HE IEs). (host) #show ap mesh debug counters ap-name meshpoint1 Mesh Packet Counters Interface Echo Sent Echo Recv Probe Req Probe Resp Assoc Req Assoc Resp Assoc Fail --- Link up/down Resel. Switch Other Parent 68865 68755 24 8(8 HT) 3(1 HT) 3(1 HT) 1 1 - - 0 Child 68913 67373 6 8 2 1 2 0 2618886 Received Packet Statistics: Total 2890717, Mgmt 2618946 (dropped non-mesh 0), Data 271771 (dropped unassociated 1)HT: pns=8 ans=1 pnr=0 ars=0 arr=1 anr=0 Recovery Profile Usage Counters Item Value ---- ----- Enter recovery mode 0 Exit recovery mode 0 Total connections to switch 0 Mesh loop-prevention Sequence No.:1256947 Mesh timer ticks:68930 The output of this command includes the following information: Dell Networking W-Series ArubaOS 6.5.x | Reference Guide show ap mesh debug counters | 1189