Dell W-Series 304 Instant 6.5.1.0-4.3.1.0 CLI Reference Guide - Page 277

clock summer-time recurring clock summer-time [recurring] first last first last [] Description Set the software clock to begin and end daylight savings time on a recurring basis. Syntax Parameter WORD 1-4 first last start day start month hh:mm -23 - 23 Description Enter the abbreviation for your time zone. For example, PDT for Pacific Daylight Time. Range 3-5 characters Enter the week number to start/end daylight savings time. For 1-4 example, enter 2 to start daylight savings time on the second week of the month. Enter the keyword first to have the time change begin or end on - the first week of the month. Enter the keyword last to have the time change begin or end on - the last week of the month. Enter the weekday when the time change begins or ends. SundaySaturday Enter the month when the time change begins or ends. JanuaryDecember Enter the time, in hours and minutes, that the time change begins or ends. 24 hours Hours offset from the Universal Time Clock (UTC). -23 - 23 Usage Guidelines This command subtracts exactly 1 hour from the configured time. The WORD can be any alphanumeric string, but cannot start with a colon (:). A WORD longer than five characters is not accepted. If you enter a WORD containing punctuation, the command is accepted, but the timezone is set to UTC. You can configure the time to change on a recurring basis. To do so, set the week, day, month, and time when the change takes effect (daylight savings time starts). You must also set the week, day, month, and time when the time changes back (daylight savings time ends). Dell Networking W-Series ArubaOS 6.5.x | Reference Guide clock summer-time recurring | 277