Dell W-Series 304 Instant 6.5.1.0-4.3.1.0 CLI Reference Guide - Page 718

Parameter client-aware client match clone cm-band-a-minsignal cm-band-g-max -signal cm-dot11v Description Range If the Client Aware option is - enabled, the AP does not change channels if there is active client traffic on that AP. If Client Aware is disabled, the AP may change to a more optimal channel, but this change may also disrupt current client traffic. The client match feature - helps optimize network resources by balancing clients across channels, regardless of whether the AP or the controller is responding to the wireless client's probe requests. If enabled, the controller compares whether or not an AP has more clients than its neighboring APs on other channels. If an AP's client load is at or over a predetermined threshold as compared to its immediate neighbors, or if a neighboring Dell AP on another channel does not have any clients, load balancing will be enabled on that AP. This feature is enabled by default Name of an existing ARM - profile from which parameter values are copied. Minimum signal level - required for the targeted A band radio in a Client Match band steer move (-dBm). Maximum signal level of the - G band radio that can trigger a Client Match band steer move (-dBm) Client Match steers using - 802.11v BSS Transition Management. Default enabled enabled - 75 45 enabled Dell Networking W-Series ArubaOS 6.5.x | Reference Guide rf arm-profile | 718