Dell W-Series 304 Instant 6.5.1.0-4.3.1.0 CLI Reference Guide - Page 2051

Parameter MAC-Address Description MAC address of the mastercontroller. IP-Address IP address of the mastercontroller. Sequence Number The number of times the mastercontroller in the whitelist received and acknowledged a remote AP whitelist change from the local controller. In the example above, the master controllers received and acknowledged three remote AP whitelist changes sent from a local controller. Remote Sequence Number The number of times that the local controller has received and acknowledged a remote AP whitelist change from the mastercontroller in the whitelist. Null Update Count The number of times the controller has checked its remote AP whitelist and found nothing to synchronize with the remote controller. By default, the controller compares its remote AP whitelist against whitelists on other controllers every minute. If the null update count reaches 5, the controller will send an "empty sync" heartbeat to the remote controller to ensure the sequence numbers on both controllers are the same, then reset the null update count to zero. Related Commands Command Description whitelist-db rap-local-switch-list Delete a local controller from the local switch table used by the remote AP whitelist whitelist-db rap del Remove an AP entry from the remote AP whitelist. Mode Config mode Config mode Command History Version ArubaOS 6.3 Modification Command introduced Command Information Platforms All platforms Licensing Base operating system Command Mode Config mode on master controllers 2051| show whitelist-db rap-master-switch-list Dell Networking W-Series ArubaOS 6.5.x | Reference Guide