Dell W-Series 304 Instant 6.5.1.0-4.3.1.0 CLI Reference Guide - Page 1085

Parameter Rx_timestamp Description Date and time the last packet was received from the client. MFP status Client is 802.11W capable/802.11W is enabled on Radio Idle Time Number of seconds elapsed since a packet was received from the client. Client Health This column shows the client health of the client and the AP radio, in the format /. These values report the quality of link between the client and radio, An AP's client health is the efficiency at which that AP transmits downstream traffic to a particular client. This value is determined by comparing the amount of time the AP spends transmitting data to a client to the amount of time that would be required under ideal conditions, that is, at the maximum Rx rate supported by client, with no data retries. A client health metric of 100% means the actual airtime the AP spends transmitting data is equal to the ideal amount of time required to send data to the client. A client health metric of 50% means the AP is taking twice as long as is ideal, or is sending one extra transmission to that client for every packet. A metric of 25% means the AP is taking four times longer than the ideal transmission time, or sending 3 extra transmissions to that client for every packet. Command History Version ArubaOS 3.0 Description Command Introduced ArubaOS 6.3.1 The Client Health metric was introduced. Command Information Platforms All platforms Licensing Base operating system Command Mode Enable or Config mode on master controllers 1085| show ap debug client-table Dell Networking W-Series ArubaOS 6.5.x | Reference Guide