Dell W-Series 304 Instant 6.5.1.0-4.3.1.0 CLI Reference Guide - Page 2180

telnet telnet [] This command must be executed from the enable mode of the controller. Description This command initiate a remote telnet session from the controller to a remote host. Syntax Parameter Description Enter the user name of the remote host. Enter the IP address of the remote host. Enter the telnet port number of the remote host. This is an optional parameter. Usage Guidelines The command usage guidelines are as follows: l This feature is supported from the SSH session of the controller only. l There is an inactivity timeout for the CLI sessions. When an administrator initiates a remote session (inner) from the controller's SSH session (outer), and the remote session takes more time than the inactivity timeout session, the outer session times out although the inner session is active. The administrator has to log back in to the outer session once logged off from the inner session. l Designated telnet client control keys do not work for remote telnet sessions. When an administrator initiates a remote telnet session (inner) from the controller's SSH session (outer), the designated telnet client control keys functions for the outer SSH session only. The administrator should designate unique control keys for each remote telnet sessions. To end the remote host session, execute the exit command. The remote host displays the following message: Connection closed by foreign host. Example The following command initiates a remote telnet session from the controller to a remote host: (host) #telnet admin 192.0.2.1 User: Password: The following command ends the remote host session: (remote-host) #exit Connection closed by foreign host. Dell Networking W-Series ArubaOS 6.5.x | Reference Guide telnet | 2180