Dell W-Series 304 Instant 6.5.1.0-4.3.1.0 CLI Reference Guide - Page 2107

Parameter DSCP mapping for WMM video AC DSCP mapping for WMM best-effort AC DSCP mapping for WMM background AC 902il Compatibility Mode Hide SSID Deny_Broadcast Probes Local Probe Response Auth Request Threshold (dB) Disable Probe Retry Battery Boost WEP Key 1 Description DSCP value used to map WMM video traffic. DSCP value used to map WMM best-effort traffic. DSCP value used to map WMM background traffic. (For clients using NTT DoCoMo 902iL phones only) When enabled, the controller does not drop packets from the client if a small or old initialization vector value is received. Shows if the profile enables or disables hiding of the SSID name in beacon frames. When a client sends a broadcast probe request frame to search for all available SSIDs, this option controls whether or not the system responds for this SSID. When enabled, no response is sent and clients have to know the SSID in order to associate to the SSID. When disabled, a probe response frame is sent for this SSID Shows if the profile enables or disables local probe response on the AP. If this option is enabled, the AP is responsible for sending 802.11 probe responses to wireless clients' probe requests. If this option is disabled, then the controller sends the 802.11 probe responses Displays the SNR threshold below which incoming authentication requests are ignored. Shows if the profile enables or disables battery MAC level retries for probe response frames. If enabled, this feature converts multicast traffic to unicast before delivery to the client, thus allowing you to set a longer DTIM interval. Displays the Static WEP key associated with this key index. 2107| show wlan ssid-profile Dell Networking W-Series ArubaOS 6.5.x | Reference Guide