Dell W-Series 304 Instant 6.5.1.0-4.3.1.0 CLI Reference Guide - Page 575

Parameter mode opt-field-1 opt-field-2 opt-field-3 opt-field-4 remote-ip role sponsor-dept sponsor-email sponsor-fullname sponsor-name start-time Description Enables or disables the user account, Range - This category can be used for some other - purpose. For example, the optional category fields can be used for another person, such as a "Supervisor." You can enter username, full name, department and Email information into the optional fields. Same as opt-field-1. - Same as opt-field-1. - Same as opt-field-1. - IP address assigned to the remote peer. Role for the user. This role takes effect when the - internal database is specified in a server group profile with a server derivation rule. If there is no server derivation rule configured, then the user is assigned the default role for the authentication method. The guest sponsor's department name - NOTE: A sponsor is the guest's primary contact for the visit. The sponsor's email address. - The sponsor's full name. - The sponsor's name. - Date and time, in mm/dd/yyy and hh:mm format, - the guest account begins. Default Disable - - - - guest - - - - - Usage Guidelines When you specify the internal database as an authentication server, client information is checked against the user accounts in the internal database. You can modify an existing user account in the internal database with the local-userdb modify command, or delete an account with the local-userdb del command. By default, the internal database in the master controller is used for authentication. Issue the aaa authentication-server internal use-local-switch command to use the internal database in a local controller; you then need to add user accounts to the internal database in the local controller. Example The following command adds a user account in the internal database with an automatically-generated username and password: 575| local-userdb add Dell Networking W-Series ArubaOS 6.5.x | Reference Guide