Dell W-Series 304 Instant 6.5.1.0-4.3.1.0 CLI Reference Guide - Page 2347

wpa2-psk-tkip wpa2-tkip xSec qbss-load-enable rts-threshold Description WPA2 with TKIP encryption using a preshared key. Range - WPA2 with TKIP encryption and dynamic - keys using 802.1X. Encryption and tunneling of Layer-2 - traffic between the controller and wired or wireless clients, or between controllers. To use xSec encryption, you must use a RADIUS authentication server. For clients, you must install the Funk Odyssey client software. Requires installation of the xSec license. For xSec between controllers, you must install an xSec license in each controller. Enables the AP to advertise the QBSS - load element. The element includes the following parameters that provide information on the traffic situation: l Station count: The total number of stations associated to the QBSS. l Channel utilization: The percentage of time (normalized to 255) the channel is sensed to be busy. The access point uses either the physical or the virtual carrier sense mechanism to sense a busy channel. l Available admission capacity: The remaining amount of medium time (measured as number of 32us/s) available for a station via explicit admission control. The QAP uses these parameters to decide whether to accept an admission control request. A wireless station uses these parameters to choose the appropriate access points. NOTE: For 802.11n APs, ensure that either wmm or high throughput is enabled. Wireless clients transmitting frames larger than this threshold must issue Request to Send (RTS) and wait for the AP to respond with Clear to Send (CTS). This helps prevent mid-air collisions for wireless clients that are not within wireless peer range and cannot detect when other wireless clients are transmitting. Default - - - disabled 2333 bytes 2347| wlan ssid-profile Dell Networking W-Series ArubaOS 6.5.x | Reference Guide