Dell W-Series 304 Instant 6.5.1.0-4.3.1.0 CLI Reference Guide - Page 1330

Column AP multicast aggregation AP ARP attack protection AP multicast aggregation allowed VLANs Console enable AP Console Protection AP Console Password Password for Backup AP USB Power override RF Band for Backup Operation for Backup BLE Endpoint URL BLE Auth Token BLE Operation Mode Description Displays the status of multicast aggregation at AP. Drop ARP packets coming from wired or wireless clients with AP gateway IP address. In other words, disallow ARP attack from un-trusted ports. Displays a list of VLANs where AP multicast aggregation is allowed. Displays if the console port of the AP is enabled. Displays if the AP console password is enable. Displays the AP console password set on the controller. NOTE: The password string is encrypted. You can view the password string by executing the encrypt disable command followed by the show ap systemprofile command. Displays the WPA passphrase for backup Virtual AP. Displays the AP USB power override status. Enabling override enables the USB port of the AP with POE AT power. NOTE: This parameter is applicable for W-AP205H access point only. If the system profile is enabled AP console access using a backup ESSID, this parameter This parameter allows AP console access using a backup ESSID, allowing users to access an AP console after the AP has disconnected from the controller. When the AP advertises a backup ESSID in either static or dynamic mode, a user is able to access and debug the AP remotely through a virtual AP. This feature is disabled by default. Displays the URL of the Meridian server to which the Bluetooth Low Energy (BLE) sends monitoring data. Displays the BLE endpoint authorization token. This token is unique for each deployment. Displays the BLE operation mode of the AP. 1330| show ap system-profile Dell Networking W-Series ArubaOS 6.5.x | Reference Guide