Dell W-Series 304 Instant 6.5.1.0-4.3.1.0 CLI Reference Guide - Page 262

Parameter Description Certain cellular devices must be modeswitched before the modem switches to data mode. no Enter the keyword no to negate the command and revert back to the defaults. priority Enter the keyword priority to override the default cellular priority (100). Range: 1 to 255. Default: 100 serial Enter the keyword serial followed by the USB device serial number tty Enter the keyword tty followed by the Modem TTY port (i.e. ttyUSB0, ttyACM0) user password Enter the keyword user followed by your login, and then enter the keyword password followed by your password to establish user name authentication. vendor product in hex Enter the keyword vendor followed by the vendor ID in hexadecimal (see show usb on page 1964) and then enter the keyword product followed by the product ID listed in the show usb command. Usage Guidelines The cellular modems are plug-and-play and support most native USB modems. Cellular modems are activated only if it is the uplink with the highest priority (see show uplink on page 1962). However, new profiles can be created using this command to support new data cards or to customize card characteristics. Command History Introduced in ArubaOS 3.4. Command Information Platforms All platforms Licensing Base operating system Command Mode Config mode on master and local controllers 262| cellular profile Dell Networking W-Series ArubaOS 6.5.x | Reference Guide