Dell W-Series 304 Instant 6.5.1.0-4.3.1.0 CLI Reference Guide - Page 658

papi-security papi-security {enhanced-security|key } no Description The papi-security command enforces advanced security options and provides an enhanced level of security. It allows to enable or disable the PAPI Enhanced Security configuration and to configure a new security key if required. Syntax Parameter Enhanced-security Key no Description Range Enables PAPI Enhanced Security Enable/Disable Secret key that is used to authenticate messages between systems 10-64 characters Disables the earlier - configuration Default Disable -- - Usage Guidelines This command allows you to use advanced options that regulate PAPI communication between controllers and W-AirWave. When enhanced security is enabled, PAPI messages are authenticated at the receiving device and are denied if validation failed. One of the ways PAPI messages are authenticated is through a shared secret key. The papi-security command lets you configure a key on the master controller which then distributes it to local controllers. If no key is configured, then the controller uses the default key. All master controllers and W-AirWave should have the same PAPI Enhanced Security configuration. Mismatch in secret key will affect centralized licensing and W-AirWave. Examples To enable the PAPI Enhanced Security mode, execute the following command: (host) (config) #papi-security (host) (PAPI Security Profile) #enhanced-security To configure a new PAPI Enhanced Security key for controllers andW-AirWave, execute the following command: (host) (PAPI Security Profile) #key 1234567890 Related Commands Command show papi-security show ipc statistics app-id Description Shows the status of the PAPI Enhanced Security configuration of thecontroller. Show the PAPI statistics for messages transmitted, received, 658| papi-security Dell Networking W-Series ArubaOS 6.5.x | Reference Guide