Dell W-Series 304 Instant 6.5.1.0-4.3.1.0 CLI Reference Guide - Page 965

show ap arm client-match summary show ap arm client-match summary [client-mac ]|[advanced] Description If the client match feature is enabled, the output of this command shows the history of AP association changes triggered by the client match feature. Syntax Parameter Description client-mac MAC address of a client for which you want to view a history of AP association changes triggered by the client match feature. advanced Display advanced debugging information. Include this parameter only under the supervision of Dell support. Example The following command displays information on the Client Match summary. (host) #show ap arm client-match summary SM: Sticky Moves, BM: Bandsteer Moves, LM: Load Balance Moves, VM: VHTsteer Moves, T: Total, S: Success, R: Reject, TO: Timeout Client Match Summary MAC SM (T/S) BM (T/S) LM (T/S) VM (T/S) Moves (T/S) Last Move (Time/Rsn/Dur)) Device Type 11v Moves (T/S/R/TO) --- ---- 84:38:38:20:df:68 0/0 1/1 0/0 0/0 1/1 Aug 13 15:58:51 2014/Bandsteer/X UNKNOWN 1/1/0/0 Total clients:1 Sticky Moves (T/S):0/0 Bandsteer Moves (T/S):1/1 VHTsteer Moves (T/S):0/0 Load Balance Moves (T/S):0/0 Moves using 11v BTM (T/S):1/1 The output of this command includes the following parameters: Parameter MAC Sticky Moves(T/S) Description MAC address of the client that was moved to a different AP radio. The output of this column shows the following two values: l T: Total number of times the client match feature attempted to move a mobile roaming client because it was staying associated (sticking) to a suboptimal AP. l S: Number of times the client match successfully moved a mobile roaming client because it was staying associated (sticking) to a sub-optimal AP. Dell Networking W-Series ArubaOS 6.5.x | Reference Guide show ap arm client-match summary | 965