Dell W-Series 304 Instant 6.5.1.0-4.3.1.0 CLI Reference Guide - Page 984

show ap arm state show ap arm state [ap-name |dot11a|dot11g|ip-addr ] Description Display Adaptive Radio Management (ARM) information for an individual AP's neighbors, or show all available data for any neighboring AP using an 802.11a or 802.11g radio type. Syntax Parameter ap-name dot11a dot11g ip-addr Description Show aggregate ARM Neighbor Information for a specific AP. Show aggregate ARM Neighbor Information for all APs using an 802.11a radio. Show aggregate ARM Neighbor Information for all APs using an 802.11g radio. Show aggregate ARM Neighbor Information for a AP with a specific IP address by entering its IP address in dotted-decimal format. Usage Guidelines The output of the show ap arm state command shows 802.11a and 802.11g information for all APs. Include an AP name or IP address to show data for just a single AP, or use the dot11a or dot11g keywords to show data for all APs using that radio type. Examples The output of this command shows 802.11a information for all neighboring APs. (host)# show ap arm state show ap arm state ap-name AP49 AP-1249:10.100.139.233:52:21:26-Edge:disable : Client Density:13 Neighbor Data Name IP Address SNR Assignment Neighbor Density ---- ---------- AP42 10.100.139.249 41 52/21 13/17/100/76 AP09 10.100.139.224 22 56/21 3/5/23/60 AP48 10.100.139.241 36 60/21 9/11/69/81 The output of this command includes the following information: Column Name IP address Description Name of an AP. IP address of an AP. Dell Networking W-Series ArubaOS 6.5.x | Reference Guide show ap arm state | 984