Dell W-Series 304 Instant 6.5.1.0-4.3.1.0 CLI Reference Guide - Page 1131

Parameter Rx Time To Me Rx Broadcast Frames Rx Probe Requests Rx Probe Requests (PPS) Rx RTS Frames Rx RTS Frames (PPS) Rx CTS Frames Rx CTS Frames (PPS) RX PS Poll Frames RX CRC Errors RX PLCP Errors Rx Frames Dropped Rx PHY Events Rx RADAR Events RX Interrupts Description Total time spent receiving frames sent to a specified BSSID. Number of broadcast frames received. Number of Probe requests received. Rate at which probe requests were received, in packets per second. Ready To Send (RTS) frames received. These frames are sent when a computer has data to transmit. Rate at which RTS frames were received, in packets per second. Clear To Send (CTS) frames received. This type of frame are used to verify that a client is ready to receive information. Rate at which CTS frames were received, in packets per second. Power-Save Poll (PS-Poll) frames received. When a client exits a power-saving mode, it transmits a PS-Poll frame to the AP to retrieve any frames buffered while it was in power-saving mode. Cyclic Redundancy Check (CRC) is a data sequence that is sent with a frame to help verify if all the data received correctly. Possible CRC error causes include: l Hardware malfunction l Loose or unconnected cables l RF interference, such as overlapping access point coverage on a channel or interfering 2.4-GHz signals from devices like microwave ovens l and wireless handset phones Physical Layer Convergence Protocol (PLCP) errors. Number of received frames that were dropped. The number of Physical Layer Events, that are not 802.11 packets, detected by radio as part of its normal receive operation. Number of times an AP detects a radar signature. Dell APs are DFS-compliant detects a radar signature, it will change its channel. The number of receive interrupts received by the CPU from the radio. Dell Networking W-Series ArubaOS 6.5.x | Reference Guide show ap debug radio-stats | 1131