Dell W-Series 304 Instant 6.5.1.0-4.3.1.0 CLI Reference Guide - Page 1693

Parameter Name AP-Group AP-name Full-name Authen-Username Revoke-Text AP_Authenticated Description Date-Added Enabled Description MAC address of the AP. Name of the AP group to which the AP has been assigned. Name of the AP. If no name has been specified, this column will display the AP's MAC address Text string used to identify the AP. This field often describes the AP's user, and corresponds to the User Name field in the RAP whitelist in the WebUI. User name of the user who authenticated the remote AP. This parameter holds the user name of the user who authenticated the remote AP. This is related to the zero touch authentication feature, as a user needs authenticate an AP before it gets its complete configuration. Before the AP is authenticated, it is given a restricted configuration to allow users to perform captive portal authorization via the remote AP's ENET ports to authenticate the remote AP. The username used during captive portal authentication will be stored in this field. This cannot be added manually when creating a localuserdb-ap entry. The command local-userdb-aprevoke includes an optional revokecomment parameter that allows network administrators to explain why the AP was revoked. If an AP is revoked, and a revoke comment entered, this text appears in the revoke-text column in the show local-userdb-ap command. When a local DB entry is reenabled via the command local-userdb-ap modify mac-addr mode enable, this field is cleared. This column indicates the authorization status of the AP. An AP can either be Authenticated or Provisioned. Remote APs that do not support certificated-based provisioning will always display a Provisioned status. Remote APs that support certificated-based provisioning can display either a Authenticated or Provisioned status, depending on their configuration and authentication status. l If the remote AP has a defined AP authorization profile, the remote AP will be in a "Provisioned" state with a limited configuration until it is authenticated. After it the remote AP has been authenticated, it will be in an "Authenticated" state. l If the remote AP does not have a defined AP authorization profile, the remote AP will be in a"Provisioned" state, but will still receive the full configuration assigned to that AP and its AP group. A text string used to further identify the remote AP. Date and time that the AP was added to the local user database This column shows if the entry in the database is enabled or disabled. Database entries can be enabled or disabled using the CLI commands: local-userdb-ap {add|modify} mac-address mode {enable|disable} and local-userdb-ap revoke mac-address 1693| show local-userdb-ap Dell Networking W-Series ArubaOS 6.5.x | Reference Guide