Dell W-Series 304 Instant 6.5.1.0-4.3.1.0 CLI Reference Guide - Page 1180

show ap lldp neighbors show ap lldp neighbors ap-name ip-addr ip6-addr (ipv6-addr> Description Show LLDP neighbors for a specific AP, or all APs sending or receiving LLDP Protocol Data Units (PDUs). Syntax Parameter ap-name ip-addr ip6-addr Description Show LLDP neighbor statistics for an AP with a specific name. View LLDP neighbor statistics for an AP with a specific IP address. Enter the IP address of the AP in dotted-decimal format. View LLDP neighbor statistics for an AP with a specific IPv6 address. Usage Guidelines The LLDP protocol allows switches, routers, and wireless LAN access points to advertise information about themselves such as identity, capabilities, and neighbors to other nodes on the network. Use this command to display information about the AP's LLDP peers. By default, this command displays LLDP neighbors for the entire list of LLDP interfaces. Include a the name of IP address of an AP to display neighbor information only for that one device. Examples The output of the command below shows the LLDP neighbor list for an AP named ap12. (host) show ap lldp neighbors ap-name ap12 AP LLDP Neighbors (Updated every 60 seconds) AP Interface Neighbor Chassis Name/ID Port Name/ID Mgmt. Address Capabilities uc bond0 0 d8:c7:c8:c4:4f:4e bond0 10.3.44.193 Capability codes: (R)Router, (B)Bridge, (A)Access Point, (P)Phone, (O)Other The output of this command includes the following information: Parameter AP Interface Neighbor Description Name of the LLDP neighbor Interface on the AP sending or receiving LLDP PDUs. LLDP neighbor number Dell Networking W-Series ArubaOS 6.5.x | Reference Guide show ap lldp neighbors | 1180