Dell W-Series 304 Instant 6.5.1.0-4.3.1.0 CLI Reference Guide - Page 2182

threshold threshold controlpath-cpu controlpath-memory datapath-cpu no-of-APs no-of-locals total-tunnel-capacity user-capacity no ... Description This command configures controller capacity thresholds which, when exceeded, will trigger alerts. Syntax Parameter controlpath-cpu controlpath-memory datapath-cpu no-of-APs no-of-locals Description Set an alert threshold for controlpath CPU capacity. The parameter is the percentage of the total controlpath CPU capacity that must be exceeded before the alert is sent. The default threshold for this parameter is 80%. Set an alert threshold for controlpath memory consumption. The parameter is the percentage of the total memory capacity that must be exceeded before the alert is sent. The default threshold for this parameter is 85%. Set an alert threshold for datapath CPU capacity. The parameter is the percentage of the total datapath CPU capacity that must be exceeded before the alert is sent. The default threshold for this parameter is 30%. The maximum number of APs that can be connected to a controller is determined by that controller's model type and installed licenses. Use this command to trigger an alert when the number of APs currently connected to the controller exceeds a specific percentage of its total AP capacity. The default threshold for this parameter is 80%. Set an alert threshold for the master controller's capacity to support branch and local controllers. Dell Networking W-Series ArubaOS 6.5.x | Reference Guide threshold | 2182