Dell W-Series 304 Instant 6.5.1.0-4.3.1.0 CLI Reference Guide - Page 1276

show ap spectrum ap-list show ap spectrum ap-list {ap-name }|{ip-addr } ap-bssid channel essid limit or page freq-band 2.4ghz|5ghz sort start Description This command shows spectrum data seen by an access point that has been converted to a spectrum monitor. Syntax Parameter ap-name Description Name of the spectrum monitor for which you want to view spectrum information. ip-addr IP address of the spectrum monitor for which you want to view spectrum information. channel View spectrum information for a specific radio channel. essid View spectrum information for a specific ESSID. limit Limit the displayed output to the specified number of entries or Use this parameter to display information that meets either of two criteria, such as a specified ESSID or channel. page Enter a number from 10-100 (inclusive) to specify the number of entries that should appear in each page of the output for this command. For example, if the output of this command has 100 entries and you select a page value of 20, the output will appear in 5 pages each with 20 entries. If you selected a page value of 10, the output would appear in 10 pages with 10 entries. freq-band 2.4ghz|5ghz View information for a specific radio type, either 2.4 GHz or 5 Ghz. sort Sort the output by the specified data column start Start displaying the output at specific spectrum index value. Usage Guidelines The Spectrum Analysis feature provides visibility into RF coverage, allowing you to troubleshoot RF interference and identify 802.11 devices on the network. Issue this command to display and sort APs seen by a specific Dell Networking W-Series ArubaOS 6.5.x | Reference Guide show ap spectrum ap-list | 1276