Dell W-Series 304 Instant 6.5.1.0-4.3.1.0 CLI Reference Guide - Page 722

Parameter cm-sticky-min -signal cm-sticky-snr cm-sticky-snr-delta cm-unst-ageout Description Range A client triggered to move to a different AP may consider an AP radio a better match if the client detects that the signal from the candidate AP radio is at or higher than the minimum signal level defined by this parameter and the candidate radio has a higher signal strength than the radio to which the client is currently associated. (The required improvement in signal strength can be defined using the cm-stickysnr-delta command.) 0-255 (-dB) If the client's received signal strength indicator (RSSI) is above this signal-to-noise ratio (SNR) threshold, that client will be allowed to stay associated to its current AP. If the client's received signal strength is below this threshold, it may be moved to a different AP. 0-255 dB A client triggered to move to a different AP may consider an AP radio a better match if the client detects that the signal from the AP radio is stronger than its current radio by the dB level defined by the cm-sticky-snr-thresh parameter, and the candidate radio also has a minimum signal level defined by the cm-sticky-min-signal parameter. 0-100 dB When client match and the - client match unsteerable client ageout feature are enabled, the controller periodically sends APs that are not a desired AP match for a client in a list of unsteerable clients. These lists contain a list of MAC addresses for up to 128 clients that should not be steered to that AP. Default 65 18 10 - Dell Networking W-Series ArubaOS 6.5.x | Reference Guide rf arm-profile | 722