Dell W-Series 304 Instant 6.5.1.0-4.3.1.0 CLI Reference Guide - Page 21

Parameter logon-wait Description Range Configure parameters for the logon wait interval. 1-100 Default 60% cpu-threshold CPU utilization percentage above which the logon wait interval is applied when presenting the user with the logon page. 1-100 60% maximum-delay Maximum time, in seconds, the user will have to wait for the logon page to pop up if the CPU load is high. This works in conjunction with the Logon wait CPU utilization threshold parameter. 1-10 10 seconds minimum-delay Minimum time, in seconds, the user will have to wait for the logon page to pop up if the CPU load is high. This works in conjunction with the Logon wait CPU utilization threshold parameter. 1-10 5 seconds logout-popupwindow Enables a pop-up window with the Logout link that allows the user to log out. If this option is disabled, the user remains logged in until the user timeout period has elapsed or the station reloads. enabled/ disabled enabled max-authentication-failures Maximum number of 0-10 0 authentication failures before the user is blacklisted. no Negates any configured - - parameter. protocol-http Use HTTP protocol on redirection to the Captive Portal page. If you use this option, modify the captive portal policy to allow HTTP traffic. enabled/ disabled disabled (HTTPS is used) redirect-pause Time, in seconds, that the system remains in the initial welcome page before redirecting the user to the final web URL. If set to 0, the welcome page displays until the user clicks on the indicated link. 1-60 10 seconds redirect-url URL to which an authenticated user - - will be directed. This parameter must be an absolute URL that begins with either http:// or https://. Dell Networking W-Series ArubaOS 6.5.x | Reference Guide aaa authentication captive-portal | 21