Dell W-Series 304 Instant 6.5.1.0-4.3.1.0 CLI Reference Guide - Page 1319

show ap spectrum monitors show ap spectrum monitors Description This command shows a list of APs terminating on the controller that are currently configured as spectrum monitors or hybrid APs Syntax No parameters Examples The output of this example shows that the 802.11a radio on a spectrum monitor named ap123 is sending spectrum analysis data to a client with the IP address 10.240.16.177. (host)#show ap spectrum monitors List of Sensors AP name Group AP Type Phy Band Subscribe Time ------- 00:24:6c:c0:0c:89 default 105 G 2GHz 10.240.16.177 2011-01-21 07:09:32 AM 00:24:6c:c0:0c:89 default 105 A 5GHz 2011-01-21 07:17:57 AM 00:24:6c:c7:d6:1c default 93 A 5GHz 2011-01-21 07:18:22 AM Channel Mode ------- ---- ----- 1 Access Point 44+ Access Point 10.240.16.177 - Spectrum Monitor 10.240.16.177 The output of this command includes the following information: Column AP name Description Name of an AP configured as a spectrum monitor or hybrid AP Group Name of the spectrum device's AP group Ap Type the AP model number Phy The radio's PHY type. Possible values are A for 802.11a and G for 802.11b/g, Band Spectrum band that the spectrum monitor or hybrid AP radio s currently monitoring. Mode This column shows whether the device is an access point configured as a hybrid AP, or a spectrum monitor. Client IP IP address of the client to which the spectrum monitor or hybrid AP is sending data. Dell Networking W-Series ArubaOS 6.5.x | Reference Guide show ap spectrum monitors | 1319