Dell W-Series 304 Instant 6.5.1.0-4.3.1.0 CLI Reference Guide - Page 2237

Parameter priority shutdown tracking interface // sub Description Range When the timer is triggered, it delays the router for a specified period of time before taking over the master router. In the mean time, if there is an advertisement from another VRRP master (existing master), the router stops the timer and does not transition to master. Defines the priority level of the 100 VRRP instance for the controller. This value is used in the election mechanism for the master. A higher number specifies a higher priority. The default priority setting is adequate for most networks. Administratively shutdown VRRP. - When down, VRRP is not active, although the controller maintains the configuration information. To start the VRRP instance, use no shutdown. Configures VRRP tracking based - on Layer-2 interface state transitions. You can configure this on Fast Ethernet or Gigabit Ethernet interfaces. You can track a combined maximum of 16 VLAN and Layer-2 interfaces. Port interface in // format. Decreases the priority of the VRRP instance by the specified amount. When the interface comes up again, the value is restored to the previous priority level. The combined priority and tracking vales cannot exceed 255. If the priority value exceeds 255, the controller displays an error message. 0-255 Default 1-255 enabled (VRRP is down) - - - 2237| vrrp Dell Networking W-Series ArubaOS 6.5.x | Reference Guide