Dell W-Series 304 Instant 6.5.1.0-4.3.1.0 CLI Reference Guide - Page 1533

Parameter Detect AP Impersonation Description Shows of the profile has enabled or disabled detection of AP impersonation. Protect from AP Impersonation Shows if AP impersonation is enabled or disabled for the profile. When AP impersonation is detected, both the legitimate and impersonating AP are disabled using a denial of service attack. Beacon Diff Threshold Percentage increase in beacon rates that triggers an AP impersonation event. Beacon Increase Wait Time Time, in seconds, after the beacon difference threshold is crossed before an AP impersonation event is generated. Detect AP Spoofing AP Spoofing detection is enabled Detect Beacon Wrong Channel Disable detection of beacons advertising the incorrect channel Beacon Wrong Channel Detection Quiet Time Wait 90 seconds after detecting a beacon with the wrong channel after which the check can be resumed. Detect Hotspotter Attack Enable detection of the Hotspotter attack to lure away valid clients. Hotspotter Quiet Time Wait 90 seconds after detecting an attempt to Use the Hotspotter tool against clients. Related Commands Configure IDS impersonation profiles using the command ids impersonation-profile. Command History Version ArubaOS 3.0 Description Command Introduced ArubaOS 6.0 Refreshed show output Command Information Platforms Available on all platforms Licensing Command Mode Requires the RFprotect license Config mode on master controllers 1533| show ids impersonation-profile Dell Networking W-Series ArubaOS 6.5.x | Reference Guide