Dell W-Series 304 Instant 6.5.1.0-4.3.1.0 CLI Reference Guide - Page 2039

Parameter Sequence Number Description The number of times the master controller in the whitelist received and acknowledged a campus AP whitelist change from the local controller. In the example above, the master controller received and acknowledged one campus AP whitelist change from the local controller. Remote Sequence Number The number of times that the local controller has received and acknowledged a campus AP whitelist change from the master controller in the whitelist. In the example above, the local controller received and acknowledged three campus AP whitelist updates from the master controller. Null Update Count The number of times the controller has checked its control plane security whitelist and found nothing to synchronize with the master controller. By default, the controller compares its control plane security whitelist against whitelists on other controllers every minute. If the null update count reaches 5, the controller will send an "empty sync" heartbeat to the remote controller to ensure the sequence numbers on both controllers are the same, then reset the null update count to zero. Related Commands Command Description whitelist-db cpsec-master-switch-list Configure the master controller whitelist for the control plane security feature. Mode Config mode Command History Version ArubaOS 5.0 ArubaOS 6.0 Modification Command introduced The cpsec-master-ctrlr-list parameter was modified to cpsec-masterswitch-list Command Information Platforms All platforms Licensing Base operating system. Command Mode Config mode on local controllers 2039| show whitelist-db cpsec-master-switch-list Dell Networking W-Series ArubaOS 6.5.x | Reference Guide