Dell W-Series 304 Instant 6.5.1.0-4.3.1.0 CLI Reference Guide - Page 27

Parameter framed-mtu heldstate-bypass-counter ignore-eap-idmatch ignore-eapol start-afterauthentication machine-authentication blacklist-on-failure cache-timeout enable Description Sets the framed MTU attribute sent to the authentication server. Range 5001500 (This parameter is applicable 0-3 when 802.1X authentication is terminated on the controller, also known as AAA FastConnect.) Number of consecutive authentication failures which, when reached, causes the controller to not respond to authentication requests from a client while the controller is in a held state after the authentication failure. Until this number is reached, the controller responds to authentication requests from the client even while the controller is in its held state. Ignore EAP ID during - negotiation. Ignores EAPOL-START - messages after authentication. (For Windows environments only) These parameters set machine authentication: NOTE: This parameter requires the PEFNG license. Blacklists the client if machine - authentication fails. The timeout, in hours, for machine authentication. 1-1000 Select this option to enforce - machine authentication before user authentication. If selected, either the machine- default-role or the user- default-role is assigned to the user, depending on which authentication is successful. Default 1100 0 disabled disabled disabled 24 hours (1 day) disabled Dell Networking W-Series ArubaOS 6.5.x | Reference Guide aaa authentication dot1x | 27