Dell W-Series 304 Instant 6.5.1.0-4.3.1.0 CLI Reference Guide - Page 978

Parameter Description l Metric value "d" is the interference the AP's neighbors see on the adjacent channel. l To calculate the total Interference Index for a channel add "a+b+c+d". Interface Name Name of the fastethernet or gigabit Ethernet interface Current ARM Assignment Current channels assigned by the AP's ARM profile. Target Coverage Index Ideal value of coverage index an AP tries to achieve on its channel. Covered channels a/g Number of channels that are currently being used by an AP's BSSIDs. Free channels a/g Number of channels that are available to an AP because that channel has a lower interference index. ARM Edge State If enabled, ARM-enabled APs on the network edge will not become Air Monitors. Last check channel/pwr Time elapsed since the AP checked its channel and power settings, in hour:minute:second format. Last change channel/pwr Time elapsed since the AP changed its channel and power settings, in hour:minute:second format. Command History Release ArubaOS 3.0 ArubaOS 6.3 Modification Command introduced. A new column util(Qual) was added to the output to indicate the channel quality. Command Information Platforms All platforms Licensing Base operating system Command Mode Enable or Config mode on master controllers Dell Networking W-Series ArubaOS 6.5.x | Reference Guide show ap arm rf-summary | 978