Dell W-Series 304 Instant 6.5.1.0-4.3.1.0 CLI Reference Guide - Page 1137

Parameter Country Code Description Display the country code for the AP. The country code specifies allowed channels for that country. ESSID An Extended Service Set Identifier (ESSID), for the AP. Encryption Encryption type used on this AP. WPA2 Pre-Auth 802.11x settings are enabled or disabled. DTIM Interval Number of beacons that should elapse before an AP sends beacon broadcasts for power save clients. 802.11a Basic Rates Minimum data rate required for a client to associate with the AP. For an 802.11a radio, this value can be 6, 12 and 24 802.11 data rates. 802.11b/g radios will report a value of 1 and 2 802.11 data rates. 802.11a Transmit Rates 802.11 data rate at which the AP will transmit data to its clients. This value can be 6-54 for 802.11a radios, and 1-54 for 802.11b/g radios. Station Ageout Time Number of seconds a station may be idle before it is deauthorized from an AP. Max Transmit Attempts maximum number of times the AP will attempt to retransmit data. RTS Threshold The minimum packet size at which the AP will issue a request-to-send (RTS) before sending the packet. Max Associations The maximum number of clients allowed to associated with the AP Wireless Multimedia (WMM) Shows if Wireless Multimedia (WMM) is enabled or disabled for this AP. WMM provides prioritization of specific traffic relative to other traffic in the network. WMM TSPEC Min Inactivity Interval Displays the minimum inactivity time-out threshold of WMM traffic for this AP. DSCP mapping for WMM voice AC Displays the DSCP value used to map WMM voice traffic. DSCP mapping for WMM video AC Displays the DSCP value used to map WMM video traffic. DSCP mapping for WMM best-effort AC Displays the DSCP value used to map WMM best-effort traffic 1137| show ap debug received-config Dell Networking W-Series ArubaOS 6.5.x | Reference Guide