HP Designjet 5000 Service Manual - Page 100

Service Tests and Utilities Self Diagnostics - Initialization Sequence LED's Max. Quality Productivity Max. Speed Front Panel Message Printer Error - Error Message/Code Corrective Action Spinning up disk Boot Failed:1f500XX n Unplug the Printer, remove the HDD cover and check that the two cables (a This is an error related flat one and the power cable) are to the Hard Disk connected. Also check that the flat Drive, either the cable connector is clipped in correctly. connections are bad or If the problem persists, replace the Hard the Hard Disk Drive or Disk Drive ⇒ Page 8-72. the Main PCA are defective. n If the problem continues, check that the Green and Orange LED's on the Main PCA are ON. If they are not ON, probably the PWS or its connections are defective. If the two LED's are ON and the error continues, replace the Main PCA ⇒ Page 8-79. Spinning up disk...OK Max. Quality Productivity Max. Speed Loading firmware.fmw Initializing Boot FAILED Download the Firmware file to the Printer ⇒ Page 9-12. Max. Quality Productivity Max. Speed Initializing L2C Initializing CLK Initializing IO BOOTROM ERROR: The BootROM version and the Firmware Current Version:XXX version do not match. Download the Necessary BootROM version indicated by the Version:XXX "Necessary Version" message. Replace and Restart COMPONENT MISMATCH: You are running a XXX printer with a XXX disk Insert XXX disk and restart. The Hard Disk Drive, or the Firmware on the Hard Disk Drive, does not match the BootROM Printer Model. For RTL Printers (Part No. C6090A and C6095A - see label on the Back Cover): Make sure RTL Hard Disk Drives and Firmware are used. For Part Numbers see Page 7-1. For Postscript Printers (Part No. C6091A and C6096A - see label on the Back Cover): Make sure Postscript Hard Disk Drives and Firmware are used. For Part Numbers see Page 7-1. 4-4 HP DesignJet 5000 Series Printers Service Manual