HP Designjet 5000 Service Manual - Page 87

HP Ink Supplies Troubleshooting Status Messages These messages provide only an action message for the user to perform. For information on accessing detailed information on consumables refer to 3-7, Obtaining Ink Cartridge Information and 3-8, Obtaining Printhead Information . Status Description Procedure OK The ink system is working correctly None Insert There is no consumable installed Insert the correct consumable. If the correct consumable is inserted, check the Carriage Tube Connector is correctly connected to the Carriage. Setup The setup message is displayed When the setting up of the tube when new tubes have been installed system is complete, the front panel into the Printer and you have will display a message installed the correct setup (XX04)Replace asking you to Printheads. remove them and replace them with 'normal Printheads'. Low Ink Cartridge Level has reached it's New supplies should be obtained low limit (100 ml.). This is an early ready to replace the particular color warning. Very Low Ink Cartridge Level has reached it's very low limit (50 ml.) Overnight printing should not be attempted. Priming of the Ink Tubes should not be attempted. A new Ink Cartridge is strongly recommended to prevent the Printer from interrupting a print. Empty Ink Cartridge is empty. The Printer A new Ink Cartridge is required. stops. Check image quality of prints in progress. HP DesignJet 5000 Series Printers Service Manual 3-11