HP Designjet 5000 Service Manual - Page 125

NOTE Service Tests and Utilities Reset Life Counters The purpose of this Service Utility is to reset the preventive maintenance counters when parts have been replaced. When you reset a preventive maintenance counter for a part, the Printer will stop displaying the maintenance warning or stop message for the part. You should only reset the life counter for a certain component when it has been replaced by a new one. Never reset the life counter for a component when it has not been replaced. 1. In the Service Utilities submenu, scroll to "1.5 Reset Life Counters " and press Enter. 1. Service Utilities 1.1 Turn DRIVE ROLLER 1.2 Prime TUBES 1.3 Altitude Setup 1.4 EEROM Setup 1.5 Reset Life Counters 1.6 Backup EEROM Top Back ↑ Make Selection ↓ Enter Press Enter 2. The following options are displayed for Reset Life Counters. Press Enter once you have made your selection. 1.5 Reset Life Counters 1.5.1 Scan Axis 1.5.2 Cuts 1.5.3 Printh. Insertions Top Back ↑ Make Selection ↓ Enter Press Enter 3. A message confirming the selection is displayed. Press Enter to confirm the reset of the life counter or Back to cancel. 1.5.1 Scan Axis Limit: 11000000 Current: 11005000 Reset this life counter? Press ENTER to accept or BACK to exit Top Back ↑ ↓ Enter Make Selection HP DesignJet 5000 Series Printers Service Manual 4-29