HP Designjet 5000 Service Manual - Page 120

Service Tests and Utilities EEROM Setup The purpose of this Service Utility is to set the Printer Model, the Serial Number and Japanese Fonts. This is required in the following situations: n The Main PCA and Hard Disk Drive are replaced at the same time (EEROM empty). n The Hard Disk Drive and Main PCA are replaced at the same time and the Main PCA has already been used (valid EEROM content); the Printer backs up the data to the Hard Disk Drive storing wrong values for the current Printer. n The main PCA EEROM and the Hard Disk Drive EEROM backup are valid at initialization but data is conflicting because they do not come from the same Printer (they have a different Model Number or Serial Number), and the user has performed the Backup EEROM Utility incorrectly (See Page 4-31). n Both the Main PCA EEROM and the Hard Disk Drive EEROM backup are corrupt or fail during Printer initialization. 1. In the Service Utilities submenu, scroll to "1.4 EEROM Setup " and press Enter. 1. Service Utilities Top 1.1 Turn DRIVE ROLLER 1.2 Prime TUBES 1.3 Altitude Setup 1.4 EEROM Setup 1.5 Reset Life Counters 1.6 Backup EEROM Back ↑ Make Selection ↓ Enter Press Enter 2. The following options are displayed for EEROM setup. Press Enter once you have made your selection: 1.4 EEROM Setup 1.4.1 Set Model Number 1.4.2 Set Serial Number 1.4.3 Set Japanese Font Top Back ↑ Make Selection ↓ Enter Press Enter 4-24 HP DesignJet 5000 Series Printers Service Manual