HP Designjet 5000 Service Manual - Page 129

Service Tests and Utilities Image Quality Warning PHONE SUPPORT This Service Utility is used to turn the Image Quality Warning On or Off. If the printer is about to print a job and Printhead health status means that a Printhead is not usable, the front panel will display a warning: Warning! Printhead quality degrading select YES to replace failing printhead(s) YES (Replace) NO (Continue) WARNING You can still print without the failed Printhead but each time you send a print job to the Printer, this warning is displayed. If you set the Image Quality Warning to Off, this message will not be displayed. If you use degraded Printheads, the print quality may be affected, particularly in Max. Quality print mode. The image is printed WITHOUT using the failed Printhead i.e. without using that color. To change the Image Quality Warning setting: 1. In the Service Utilities submenu, scroll to "1.7 Img. Quality Warning" and press Enter. 1. Service Utilities 1.2 Prime TUBES 1.3 Altitude Setup 1.4 EEROM Setup 1.5 Reset Life Counters 1.6 Backup EEROM 1.7 Img. Quality Warning Top Back ↑ Make Selection ↓ Enter Press Enter 2. The following message is displayed. Select Yes or No and press Enter to confirm. 1.7 Img. Quality Warning Top Back ↑ Yes y No Make Selection ↓ Enter Press Enter HP DesignJet 5000 Series Printers Service Manual 4-33