HP Designjet 5000 Service Manual - Page 63
Replace the Lens Cover Assembly, Replace the Main PCA - drive roller assembly
View all HP Designjet 5000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 63 highlights
System Error Codes System Error: 050000 (Continuable) Problem Description: Lens has problems reading the Mark Encoder on the Drive Roller. Corrective Action: Try the following: n Clean the Mark Encoder on the Drive Roller using the Turn DRIVE ROLLER Utility ⇒ Page 4-18 n Replace the Lens Cover Assembly ⇒ Page 9-5. System Error: 050001 (Continuable) Problem Description: Lens has problems reading the Mark Encoder on the Drive Roller. Corrective Action: Try the following: n Clean the Mark Encoder on the Drive Roller using the Turn DRIVE ROLLER Utility ⇒ Page 4-18 n Replace the Lens Cover Assembly ⇒ Page 9-5. System Error: 06030C Problem Description: Bad Line Sensor. Corrective Action: Try the following: n Replace the Carriage Assembly ⇒ Page 8-46 n Replace the Trailing Cable ⇒ Page 8-36. n Replace the Main PCA ⇒ Page 8-79. WARNING Only replace one component at a time and check if the error has gone before replacing another component. Using this procedure you will be able to determine exactly which component failed. HP DesignJet 5000 Series Printers Service Manual 2-11