HP Designjet 5000 Service Manual - Page 62
Clean the Mark Encoder on the Drive Roller using the Turn, Error in Paper-axis Motor Encoder
View all HP Designjet 5000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 62 highlights
System Error Codes System Error: 010090 (Continuable) Problem Description: Error in Paper-axis Motor Encoder Corrective Action: Try the following: n Check that the Paper-Axis Motor cable is NOT broken or damaged. n Check that the Paper-Axis Motor cable is correctly connected. n Replace the Paper-Axis Motor ⇒ Page 8-100. n If the Error Code continues, replace the Main PCA ⇒ Page 8-79. WARNING Only replace one component at a time and check if the error has gone before replacing another component. Using this procedure you will be able to determine exactly which component failed. System Error: 010091 (Continuable) Problem Description: Error in Paper-axis Motor Encoder Corrective Action: Refer to System Error Code 010090. System Error: 010092 (Continuable) Problem Description: Mark Encoder position not detected on Drive Roller. Corrective Action: Try the following: n Replace the Lens Cover ⇒ Page 9-5. n Clean the Mark Encoder on the Drive Roller using the Turn DRIVE ROLLER Utility ⇒ Page 4-18. System Error: 011000 Problem Description: NIB Crash. Corrective Action: Power the Printer OFF and ON again using the Power Switch at the back of the Printer. 2-10 HP DesignJet 5000 Series Printers Service Manual