HP Designjet 5000 Service Manual - Page 99
Service Tests and Utilities, Self Diagnostics - Initialization Sequence
View all HP Designjet 5000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 99 highlights
Service Tests and Utilities WARNING Only replace one component at a time and check if the error has gone before replacing another component. If the error is still present after replacing a component, remember to REINSTALL the component that was first removed before replacing another component. Self Diagnostics - Initialization Sequence LED's Front Panel Message Printer Error - Error Message/Code Corrective Action Max. Quality Productivity Max. Speed Self Test Please Wait The Printer hangs and Install the BootROM or replace it if already nothing else happens installed ⇒ Page 8-75. Error Memory Config:X (sometimes only the error code is displayed) If X = 7 reseat the DRAM DIMM's, otherwise replace the DRAM DIMM's ⇒ Page 8-75. Max. Quality Error Memory Test Replace the DRAM DIMM's ⇒ Page 8-75. Productivity Max. Speed Max. Quality End Self Test Productivity Max. Speed Max. Quality Productivity Max. Speed Initializing Power Supply Error #1 Contact HP Representative The Trailing Cable is not connected correctly. Reconnect the Trailing Cable ⇒ Page 8-36. Initializing IO devs BootROM checksum Replace the BootROM ⇒ Page 8-75. failed HP DesignJet 5000 Series Printers Service Manual 4-3